The DisGard Sharps
Disposal Pad is an anti-needlestick sharps pad with many key features
designed to make sharps protection an
integral part of the clinicians practice.
DisGard is
a robust, clear plastic hinged wallet with an adhesive
pad to hold the discarded sharps in place during the
clinical procedure. To finally close the pad use the outer
flanges. The pad retains
all fluids on closure.
Product Description
Key Features:
. Single use device
. Clear visual control at all times
. Resistant to needle puncture
. Strong adhesive pad retains sharps during the procedure
. Retains fluid on closure
. After use sharps remain visible for counting
Product range
| No: |
Denomination: |
Item No: |
| 1 |
DisGard sharp pads with one rest area |
10101 |
Dimensions: 100mm
x 138 mm across
0.5mm thick
Materials
All components are
LATEX FREE
Wallet (Wallet01):
Material name: PET, water-clear
Supplier : Gábos Kft.
Top Foam Pad (STR30):
Material Name: ISP2145E polyurethane
Supplier : Gábis Kft.
Peel & Stick
Top Cover (STR 100):
Material : 64621
Self-adhesive, polypropylene film with transparent
synthetic bonding material, covering a yellow paper
lubricated with silicone oil
Manufacturer : TESA
Peel & Stick
Back Cover (STR 110):
Material
: 64621
Self-adhesive, polypropylene film with
transparent synthetic bonding material,
covering a yellow paper lubricated with
silicone oil
Manufacturer : TESA
Foam
strips (STR05):
Material Name:
ISP2145E polyurethane
Manufacturer : Gábis
Kft.
Pouch:
Material : Paper /
Polyethylene
Manufacturer : Westfield Medical Ltd.
Material is complies with EN 868 Standard requirements.
Boxes:
Material
: 23 C for the shipping cartoons
and 322 1F for the small boxes
Manufacturer : Dunapack RT.
Dunapack RT has ISO 14001 Quality system.
Disgard products sterilised by using a validated ETO gas sterilisation process,
and meet the requirements of Class I, sterile device of MDD 93/42 EEC.
Securegard® products
are bio-compatible and sterilised by using a validated
ETO gas sterilisation process.
Syringes are meet the ISO 7886-1 Standard requirements, except the Luer-connection,
and also meet the MDD 93/42 EEC requirements. |
